Key Features of the MIG-185CMT Welding Machine with Accessories MIG MAG welding Direct current (DC) gas protection welding with inert gas “MIG welding” (e.g. – argon) or with active gas “MAG welding” (a mixture of carbon dioxide CO2 and argon) Synergic MIG MAG Variant of pulse MIG MAG welding, where the welding parameters are already preprogrammed Welding with FLUX cored wire Welding with FLUX cored wire (welding without protective gas) TIG WeldingWelding with DC – direct currentHF ignitionIgnition without contact in TIG modePlasma cutting With 45A for cutting metals up to 12mm Clear LCD control panel On the control panel, you can set the following welding parameters: Welding process selection: MAN MIG (manual MIG), SYN MIG, HF TIG, CUT, MMA Rotary control: Voltage for MAN MIG (manual MIG) and SYN MIG processes Rotary control: Wire feed / Welding current / Selected parameters Selection: Welding material and welding gas (function available only in SYN MIG) Selection: Welding wire diameter (only for SYN MIG) / Quick wire feed (only for MAN MIG and SYN MIG) Ind – Inductance (arc concentration) Wire feed speed at the beginning of the arc (only for MAN MIG and SYN MIG) Pre-gas time: for MAN (manual MIG), SYN MIG, HF TIG, and CUT Post-gas time: for MAN (manual MIG), SYN MIG, HF TIG, and CUT MIG torch mode: 2 cycles / 4 cycles / spot welding for MAN MIG and SYN MIG Other Functions HF TIG welding (In most cases, high-frequency ignition is used for TIG welding. This is a contactless ignition that creates the arc without touching the workpiece with the electrode): Contactless ignition for a clean start and reduced electrode wear. Precise control for welding thin materials. Cleaner welds with no sparks or contamination. Suitable for various materials (e.g., aluminum, stainless steel). Reduced likelihood of errors and easier welding in hard-to-reach areas. 2-wheel drive: Stable and precise wire feed with consistent tension. Less wire wear, better feeding for longer torches. Reduced risk of errors and improved welding quality. Pre-/Post-gas regulation: Pre-gas protects against oxidation and stabilizes the welding arc (This function allows you to set the gas pre-flow time in seconds, which removes surrounding air from the weld before welding and creates a protective gas atmosphere). Post-gas cools the weld and extends electrode life. Together, they improve weld quality, reduce errors, and increase welding reliability. Tehnical data Welding procedures: MAN MIG, MAN MAG, SYN MIG, SYN MAG, FLUX, HF TIG, LIFT TIG, CUT, and MMA Input voltage: 230V, single-phase, 50/60Hz Protection rating: IP21S Overload indication: Yes Cooling: Ventilated Magnetic valve: Yes Duty cycle: MIG/HF TIG/MMA: 185A at 60%, 144A at 100%, CUT: 45A at 60%, 31A at 100% Welding current range: 20A – 185A No-load voltage: 60 – 65 V Max. spool diameter: 200 mm Wire feed: 2 wheels (2 drives) Max. wire diameter: 0.6 mm – 1.2 mm MMA electrode diameter: 1 – 5 mm Machine weight: 12 kg Scope of delivery 1x IPOTOOLS MIG-185CMT welding machine with accessories 1x MIG torch MB15 with accessories (3m) 1x TIG-17 torch (4m) 1x PT 31 plasma torch (4m) 1x Grounding cable (2.5m) 1x Electrode holder (2.5m) 1x Air regulator 1x V-type wire feeder 0.8-0.9 mm 1x U-type wire feeder 1.0-1.2 mm IPO Technik-Handels GmbH grants all customers a 7-year guarantee for all welding machines and / or plasma cutters that were purchased directly from IPO Technik-Handels GmbH of the IPOTOOLS brand. You can find warranty conditions here: warranty conditions
